"uxnmr.info" (fmp600)
CONFIGURATION INFORMATION
=========================
Path
: /opt/topspin3.1/conf/instr/spect/uxnmr.info
Date
: Thu Sep 27 15:56:37 2012
Release : TopSpin
Acquisition Version 3.1-pl5
Installed in : /opt/topspin3.1
Host
: fmp600
OS
: CentOS release 5.8 (Final)
CPU
: Intel(R) Xeon(R) CPU W3505 @ 2.53GHz (2 cores at 1596 MHz)
User
: guest (Guest Account)
Description
: Avance III 600
Location : FMP Berlin
System
: Avance III NMR spectrometer
1H-frequency : 600.20 MHz
Order
Number : 10063006
Configured in: /opt/topspin3.1/conf/instr/spect
IPSO: connected to spectrometer subnet
- TCP/IP address =
149.236.99.254
- Tctrl : 1
- Fctrls: 4
- Gctrl1: without digital
preemphasis
- Rctrl : none
- FREDs : none
- DPP : none
DRU: AQS DRU-E Z102520/02690 ECL 06.02
- TCP/IP address = 149.236.99.89
- Firmware Version = 111024
- DRU controls AQS-Rack and HPPR/2
AQS: connected to 149.236.99.89:/dev/tty10
_Slot_ SBSB
_____________________Board_____________________
Number Addr Type HW-VS FW-VS
ID ECL Name Description
-----------------------------------------------------------
2 0x10 0x42 0x4 AV R
5.1 REC-1 AQS RXAD600
Z102117/1300 ECL 05.01
3 0x34 0xc9 0x1
X 1.3 REF-1 REF/2-1000 Reference Board for AQS/2
Receiver
4 0x24 0x19 0x8 AD S
2.8 SGU-1 AQS SGU/2 600
Z103081/02937 ECL 02.08 FPGA-Vs=AF
5 0x25 0x19 0x8 AD S
2.8 SGU-2 AQS SGU/2 600
Z103081/02938 ECL 02.08 FPGA-Vs=AF
6 0x26 0x19 0x8 AD S
2.8 SGU-3 AQS SGU/2 600
Z103081/02939 ECL 02.08 FPGA-Vs=AF
7 0x27 0x19 0x8 AD S
2.8 SGU-4 AQS SGU/2 600
Z103081/02940 ECL 02.08 FPGA-Vs=AF
21 0x21 0xcf 0
P 1.0 PSD-1
23 0x20 0xd1 0
B 3.2 MASTER
25 0x20 0x7 0
B
MASTER AQS Rack Master
Logical Receiver/SGU configuration:
Router: none
installed
Transmitters at the spectrometer subnet:
----------------------------------------
BLA_W1345092_0537 W1345092/0537
ECL 11:
- TCP/IP address = 149.236.99.253
- Firmware VS = 20100510
-
Amplifier =
BLAX300 E 6-365MHZ INR: W1345092/0537 ECL 11
- Router
= BLMMR31 RF AMPLIFIER MODULE: W1345212/1943 ECL 20
-
Controller = BLA
CONTROL BOARD 6 2CH: W1522050/6321 ECL 50
BLA_W1345096_0859 W1345096/0859
ECL 30:
- TCP/IP address = 149.236.99.244
- Firmware VS = 20100510
-
Amplifier =
BLAXH2H300/100/150 E 200-600MHZ INR: W1345096/0859 ECL 30
- Router
= BLMMR32 RF AMPLIFIER MODULE: W1345204/1438 ECL 20
-
Controller = BLA
CONTROL BOARD 6 2CH: W1522050/6380 ECL 50
- QNP-Accessory : 1 X-input and 1 H-input
LTRX
Z109890/00243 ECL 02.01:
- TCP/IP address = 149.236.99.20
-
Amplifier =
BSMS/2 LOCK TRANSCEIVER 600: Z109890/00243 ECL 02.01
BSMS: BSMS/2
connected to ethernet
- TCP/IP address = 149.236.99.20
- ELCB firmware
version = 20111004
- GAB current limits = 0.0/X, 0.0/Y, 10.0/Z (in A)
-
SCB channels = 40
- Shim System = BOSS3-SB
- L-TRX = BSMS/2 LOCK
TRANSCEIVER 600: Z109890/00243 ECL 02.01
- Lock: on L-TRX board
-
VTU_SPB = BSMS/2 SPB SENSOR & PNEUMATIC BD: Z115191/00733 ECL 03.00
-
VTU_VPSB1 = BSMS/2 VARIABLE POWER SUPPLY BD: Z115193/00835 ECL 01.03
VTU: in BSMS/2 connected to ethernet
- TCP/IP address = 149.236.99.20
Bruker Automatic Changer: device connected to
149.236.99.254:/dev/tty05
- Capacity: 60 holders
- Firmware: 970425
- use BACS air = no
- BACS sx
delay = 10 s
- Sample Rail fast changer mode = no
Preamplifiers
:
HPPR: - HPPR/2 preamplifier connected to 149.236.99.89:/dev/tty10
Type : HPPR/2
Controller:
Application firmware = AQ
15 LEDs for tuning, 15 LEDs for matching
Module 1 : 1H LNA
PN=Z003462, SN=00848 from 20111112
Module 2 : XBB19F 2HS
PN=Z003506, SN=01049 from 20111109
Module 3 : XBB19F 2HS
PN=Z003506, SN=01050 from 20111209
Module 4 : 2H
PN=Z003473, SN=00891 from 20111124
Frequency
generation:
- F1: for SGU
- F2: for SGU
- F3: for SGU
- F4: for
SGU
RF cable connections (detected by 'confamp')
--------------------------------------------------------------------
SGU1
NORM output -> input 1 of transmitter 2 (BLAXH2H300/100/150 E 200-600MHZ
W1345096/0859 at TCP/IP 149.236.99.244)
SGU1 AUX output -> input 2 of transmitter 1
(BLAX300 E 6-365MHZ INR W1345092/0537 at TCP/IP 149.236.99.253)
SGU2 NORM
output -> input 2 of transmitter 2 (BLAXH2H300/100/150 E 200-600MHZ
W1345096/0859 at TCP/IP 149.236.99.244)
SGU2 AUX output -> TUNE signal input of
HPPR
SGU3 NORM output -> input 1 of transmitter 1 (BLAX300 E 6-365MHZ
INR W1345092/0537 at TCP/IP 149.236.99.253)
SGU3 AUX output -> input 3 of transmitter 2
(BLAXH2H300/100/150 E 200-600MHZ W1345096/0859 at TCP/IP 149.236.99.244)
SGU4 NORM output -> input 4 of transmitter 2 (BLAXH2H300/100/150 E
200-600MHZ W1345096/0859 at TCP/IP 149.236.99.244)
SGU4 AUX output -> open
Blanking
cable connections (detected by 'confamp')
--------------------------------------------------------------------
transmitter 1 (BLAX300 E 6-365MHZ INR W1345092/0537 at TCP/IP 149.236.99.253)
amplifier X-300W uses blanking 3
transmitter 2 (BLAXH2H300/100/150 E
200-600MHZ W1345096/0859 at TCP/IP 149.236.99.244) amplifier 1H-100W uses
blanking 2
transmitter 2 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0859 at
TCP/IP 149.236.99.244) amplifier X-300W uses blanking 1
transmitter 2
(BLAXH2H300/100/150 E 200-600MHZ W1345096/0859 at TCP/IP 149.236.99.244)
amplifier 2H-150W uses blanking 7
transmitter 3 (BSMS/2 LOCK TRANSCEIVER
600 Z109890/00243 at TCP/IP 149.236.99.20) amplifier 2H-5W needs no
blanking
Switchbox (3 outputs: X / F / H) routing
--------------------------------------------------------------------
BLAXH2H300/100/150 E 200-600MHZ W1345096/0859 at TCP/IP 149.236.99.244
amplifier X-300W at blanking 1 can be routed to switchbox output 1 = X and
output 2 = F
BLAXH2H300/100/150 E 200-600MHZ W1345096/0859 at TCP/IP
149.236.99.244 amplifier 1H-100W at blanking 2 can be routed to switchbox
output 1 = X, output 2 = F and output 3 = H
BLAXH2H300/100/150 E 200-600MHZ
W1345096/0859 at TCP/IP 149.236.99.244 amplifier 2H-150W at blanking 7 can be
routed to switchbox output 5 (unknown)
last changes 11.10.2012 Peter Schmieder